MOSFET Power Module Test Bench

MOSFET Power Module Test Bench

The MOSFET power module test bench is made for the power module electrical test, composed of MOSFET power, made to be mounted in alternator-starters.

The power modules are conveyed, from the assembly and welding machines, onto carriers thanks to a belt transfer composed of different conveyor sections, an elevator at the entrance and exit of the machine, storage stops and an indexing station of the carriers.

The power module’s Datamatrix identification code allows complete traceability of the tests and results associated with each of the products.

When a carrier arrives at the unloading station, a robot equipped with a gripping hand takes the product by suction and deposits it on one of the two rotating plates.

Each power module undergoes electrical tests at 3 dedicated stations on the trays. The connection to the product is made via a higher test cassette allowing the connection of the measurement signals and via a lower test cassette allowing connection of the power. Each test station is associated with a dedicated test bay.

The successfully tested products are unloaded from the rotating plates by the robot and loaded into thermoformed trays at a stacker / destacker.

MOSFET power module test bench specifications:

  • Clean room environment
  • FANUC LR Mate Robot
  • Cognex vision sensor
  • Siemens S7-300 controller
  • Ionized air blowing for cooling
  • Connectors Touch pad 200A
  • RLC Measurement Bridge
  • National Instruments PXI Rack
  • Multimeter & switching matrix
  • Electronic charges

Do You Have a Similar Need?

Contact our sales team to get a personalized quote for a custom-made project.

They Trust Us

logo sanofi
logo Staubli
logo biomerieux
logo ST Micro
logo bd
logo ITEN
logo Baush + Lomb
logo Xfab
logo Boehringer Ingelheim
logo EFI Automotive
logo Stilla
logo Soitec
logo fresenius care
logo Valeo
logo Ceva
logo Michelin
logo Symatese Device
logo BOBST
logo ipsen
logo Schneider Electric
logo Medtronic
logo ABL
logo Catalent
logo bioron
logo pfizer
logo clariant
logo aguettant
logo service santé armées

Follow the News of MGA Technologies

Subscribe to the newsletter of MGA Technologies

Contact Us

We are available from 8am to 6pm (UTC-4), Monday to Friday.

3038, boul. Curé-Labelle

Prévost (Québec), J0R 1T0