Speed Sensor Bending Equipment

The speed sensor bending equipment is mainly used in the automotive, aerospace, and precision mechanics industries. It is used to measure the magnetic rotation speed for controlling the speed of a thermal or electric motor.

The bending apparatus makes it possible to bend this sensor to be ready to be welded on an electronic circuit.

Speed Sensor – Technologies and Use

The speed sensor measures the magnetic rotation speed to deliver a voltage corresponding to the speed of rotation. It allows ,for example, at the wheel, to transmit the information to the ESP (Electronic Stability Program) computer or ABS (anti-lock break system) to anticipate the changes to be made to prevent wheel lock when braking.

The use of speed sensors is not limited to automobiles. The tachometer is the most widely used device for measuring speed.

Several types of speed sensors exist: inductive / magnetic sensors, magnetoresistive sensors or hall effect sensors. These are much less subject to spurious signals than inductive / magnetic sensors.

Speed sensors also come in many brands, and manufacturers have even created portable devices such as speed cameras that traffic police use to measure drivers’ speed.

Speed sensors are important tools in the automotive, aerospace and precision engineering industries. For example, more than 100 hall sensors can be integrated in one vehicle. More information about the position sensors.

 

Speed Sensor Cutting and Bending Equipment

 

The speed sensors (Hall effect active sensor type) are delivered by manufacturers, most of the time, in strips with hundreds of components. The bending equipment allows you to cut and bend the pins of the detectors before integration on an electronic circuit.

The primary objective of an automatic speed sensor cutting and bending device is to obtain parts ready for use in a minimum of time without human intervention.

In comparision, an operator is essential with manual so productivity is greatly reduced because the amount produced per hour is limited.

Handheld equipment is intended to be used for training, educational purposes and product testing or prototyping. On the other hand, when large scale production is required, it is recommended to use an automatic equipment, with better precision and parts available in quantity at the lowest cost.

MGA Technologies Bending Equipment

 

The MGA Technologies bending machine is fully automated to meet all your needs. It allows sensors cutting in bands and to bend them with different types of bending:

  • K, KA, KB and KT form
  • SE, SG, SH and SJ form
  • UA form

 

In its latest version, the MGA Technologies device is an easy-to-use, efficient and scalable equipment.

Technical Specifications

 

The technical features of the MGA Technologies speed sensor cutting machine:

  • Modular bending up to 3 positions
  • Camber from 0 to 90 degrees
  • Magnetic components or not of 3 and 5 legs
  • Compact: Height, Length, Width – 64 cm, 62,5 cm, 60 cm
  • Bending rate: 900 speed sensors / hour
  • Noise level: less than 70 dB
  • Accuracy of bending: less than 2 °
  • Cutting accuracy: +- 0.1 mm

 

MGA Technologies – Sensor Bending Machine Manufacturer

 

In addition to the speed sensor bending device, MGA Technologies also manufactures special machines dedicated to various pharmaceutical and biotechnological sectors, such as the sterile hose connector and disconnector. The company also designs and manufactures a wide range of equipment for clean rooms, such as pharmaceutical service units, laboratory dynamizers and medical carts.

MGA Technologies offers its expertise in mechanical design, assembly, mechanical development, automation, robotics and prototyping. Its mission is to design and produce the best assembly and control systems in clean environments.

MGA Technologies offers solutions for automation, mechanical adjustment, assembly, robotization and mechanical studies to guarantee its customers success in their projects. The company’s ambition is to produce better, faster, safer, more reliable and flexible.

Until the start-up of the installations, clients’ projects are studied and delivered according to their specifications. MGA offers technical follow-up and maintenance of the equipment as soon as it is installed, as well as preventive and corrective maintenance on their existing machines.

Check out the MGA Technologies cutter and camber brochure or ask for a free, no-obligation quote.

Get a Free No-obligation Quote

Contact our commercial team to get a customized quote for a MGA Technologies bending equipment.

They Trust Us

Do You Need a Quotation ? Contact Us

Contact MGA Technologies

We are available from 8am to 6pm (UTC+2), Monday to Friday.

22, Chemin des Prés Secs

69380 – Civrieux d’Azergues

France